中文
English
Home
Applications
Products
Certification
About Us
Contact
Petrochemistry
APPLICATION AREAS
Petrochemistry

A growing market, driven by the increasing demand for energy and chemicals. Temperature control solutions are essential to this market as they are used to control the production and processing of petroleum and gas products.

Designed to meet the strict safety requirements of this high-risk sector, our products are manufactured with high-quality materials and components that are resistant to corrosion and chemicals. Here are some examples:

 

These products can be customised to meet your needs and application.

 Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.

Products available in the field of Petrochemistry
Type 9VJBE
Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 Miniature electronic th...
Type 9UW
Overmolding of terminations heating cable supplied by customer
Type 6YTNM
Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembl...
Type 6YTNE
Termination caps for closing the free end of round and flat heating cables (workshop or field us...
Type 6YTPT and PYTQT
Stainless steel mounting feet for connection boxes, snapped-on or screwed on the bottom of the bo...
Type 6YTPP
Heat tracing pipe mounting feet for connection boxes, includes gasket for flat self-regulating ca...
Type 9VJ32
Antifreeze flexible jacket heaters for glass or plastic containers
Type 9VJV6
Fixed temperature setting flexible jacket heaters for glass or plastic containers
Type 9VJF6
Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC
Type 9VJMA
Flexible jacket heaters with adjustable electronic thermostat, surface mounted, for glass or pla...
Type 9VJEF
Flexible jacket heaters with remote digital display electronic controller for
Type 9VJAE
Flexible jacket heaters with 20-125°C adjustable electronic thermostat, surface mounted, for meta...
Type 9VJAD
Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surfa...
Type 9VJAF
Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, remot...
Type 9VJDA
Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature ele...
Type 9VJDF
Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital disp...
Type 49C
Thermostats overmolded on heat tracing cables supplied by customer
Type 9VJBD
Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electro...
Type 9VJBF
Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electro...
Type 9V4
Base heater for 55 gallons metal drum
Type 9SWR2
Immersion heater for 1000 liters IBC
Type Y8WTZ and 9H060
Stirrer speed controller with IP65 enclosure and compact full stainless steel stirrer for drums a...
Type 9CG1
Commercial and industrial convection radiators 110mm compact range, IP65, without fan
Type 9CH
Commercial and industrial convection radiators Upward blowing models
Type 9CA
Waterproof industrial radiators Small industrial electric baseboard heaters, natural convection, ...
Type 9CB
Waterproof industrial radiators Industrial electric baseboard heaters, natural convection, width ...
Type 9AD
Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing.
Type 9AB
Silicone rubber heating belts for metal drums, with surface mounted bulb and capillary thermostat
Type 9AC
Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-1...
Type 9AK
Non flexible silicone heaters vulcanized on aluminium board, surface mounted adjustable thermosta...
Type 9AL
Non flexible silicone heaters vulcanized on aluminium board, with remote electronic temperature ...
Type Y6, Y7, Y8 Electronic thermotats
Y6, Y7, Y8 types temperature control boxes Electronic thermostat types
Type BJ
Steatite connection blocks 450V range Protected against accidental electric contact, stamped term...
Type Y048 and Y049
Rod thermostats
Type YF5GPP
Adjustable set point rod thermostat, with high corrosion resistance housing, specifically designe...
Type Y2U
Thermostat with external knob adjustment, IP65, with two pilot lights, for industrial jacket and...
Type 2DPAP6F
Digital display electronic controller, ON-OFF action, IP69K and IK10 enclosure, wall mounting
Type Y2T2 and Y2T3
Electronic thermostats, remote sensor, IP69K enclosure in PA66 and PC
Type 4YC
Thermostats for incorporation, wire and cable electrical connections Miniature temperature limite...
Type 4VA and 4VB
Thermostats for incorporation, wire and cable electrical connections Miniature temperature limite...
Type Y98KAA
Thermostats and limiters, connection inside EX « e » aluminum housing with built-in connection bl...
Type ZA
Positive pressure switches Low voltage circuit adjustable positive pressure switch. Quick connec...
Type ZQ
Positive pressure switches Pressure switch, single pole snap action contact. Not adjustable set p...
Type MA
Adjustable set point positive pressure switches Snap action contact pressure switches, field adju...
Type MB
Adjustable set point positive pressure switches Snap action contact pressure switches, field adju...
Type MN3
Adjustable set point positive pressure switches Positive pressure switch Snap action, 3 poles, a...
Type ZT
Air switches for spas and swimming pools Snap action, double poles air switch, center ¼” thread m...
Type BA
Steatite connection blocks, 250V range With pressure screws, protected against electric shock
Type Y0A8 and Y0A9
Bulb and capillary thermostats, with built-in pilot light and 2 or 3 M20 cable glands
Type BK
Very high temperature steatite connection blocks. Indirect pressure clamping with pressure plate,...
Type BC
Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate,...
Type BM
Terminal blocks in ceramic for 3 phase asynchronous electrical motors 450V range Brass or zinc p...
Type Y24
2 ways in line connection box for heat tracing cables,for traditional or self-regulating cables
Type Y25
3 waysin T connection box for heat tracing cables, for traditional or self-regulating cables
Type Y260
3 parallel ways connection box for heat tracing cables, without thermostat
Type Y27
3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-...
Type Y28
4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-...
Type Y29C and Y29D
Connection box, with pipe mounting leg, for heat tracing cables, for two traditional or self-regu...
Type Y501 and Y502
2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for se...
Type Y514
4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for se...
Type 49JB
M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient tem...
Type Y22
2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifree...
Type Y261
3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat
Type TNJB TPJB TSJB and TJJB
M20x1.5 temperature sensors for mounting in cable glands holes or threads, for boxes external amb...
Products are currently being classified and cannot be displayed at the moment