• Air and Fluid heating solutions
• Renewable energy
• Industry
• Ventilation
• Agriculture and Farming
• Petrochemistry

Applications
This box allows to connect, with a good ingress protection (IP66), end-to-end, on field, a round or flat heating cable to a round power cable, and providing at the same time the continuity of the power line. An example of this type of connection is the feeding of heated drinking troughs in stables or breeding premises. The internal connection terminal block is in ceramic.

                                                                                                   Main features Material: Polyamide 66 black, 98mm x 98 mm x34mm. Good UV resistance.

Waterproof grade: IP66.

Mounting:
- Wall mounting: by 2 side lugs for 4 mm diameter screws, 60mm distance.

- Pipe mounting: By a nylon cable tie. The oblong holes of the lugs allow the passage and holding of a cable tie.

Terminal block:
- High temperature ceramic with screw and saddle terminals for 0.5mm² to 2.5mm² conductors- Maximum permissible intensity: 16A 250V
Cable clamping: with M24 cable glands, with silicone gaskets
- Maximum diameter of round cables: 8mm on B and C output
- Size limits of flat cable on A output: from 8.7 x 3.5 to 14.2 x 9.2mm.

For more information about tightening possibilities on round and oblong cables, see the catalogue page on 6YTP cable glands.

For cables of larger dimensions or too rigid to be able to be fitted inside this model, see the connection boxes of the Y26 and Y27 series.

Easy assembly: It is possible to slide the ceramic terminal block out of the body to connect the cables outside of it.

Main part numbers

* Silicone seals recommended for ambient temperature higher than 80°C