The product does not currently have its own area

Applications

Solid state relay power control, for metering power of infrared emitters between 5% and 100% of their nominal value. For use in professional and commercial premises, industrial and livestock buildings.

                                                                                                   Main features

Set point display: Potentiometer graduated in % of power.

Output: Zero crossing, (no radio interference), with 10ms cycle time, for use on low thermal inertia medium and long infrared emitters.

Enclosure: 180x130x78mm, rear in aluminum with cooling fins, front in black PA66.

Protection class: IP65, with waterproof gasket on adjustment potentiometer shaft

Mounting: Wall mounting, with 4 removable legs, 70 x 96mm distance

Internal Connection: 4 ways 6mm², ceramic terminal block. (2 power input terminals, 2 power output terminals). 2 earth terminals.

Cable Input-Output: By 2 cable glands, M20, polyamide.

Overheat protection: Built in high limit disc thermostat, automatic reset, opens at 80°C.

2 pole on-off switch: Available on 25A 220-240 models only (does not allow power adjustment between 0 and 20%) Residual voltage at off: ≤ 1.5V

Leakage current at off: ≤ 4mA

Ambient temperature: -20 to +70°C

Isolation Voltage: 2000VAC

Insulation resistance: 500MΩ/500VDC

Important:

- Like all solid state relays, this device dissipates about 0.5% of the power by the Joule effect.

- Install this unit in a line with a power switch and an appropriate circuit breaker.

- Not to be used for electric motor speed control