![](/static/img/logo/logo.png)
![](https://ultimheat.info/picture/Type%20DT4.jpg)
- Air and Fluid heating solutions
- Renewable energy
- Industry
Use: low voltage circuits
Main applications: steam generators, coffee machines, vending machines, air conditioning pumps, dehumidifiers, tanks. The side mounting allows to adjust the level on big size tanks.
Stem material: PBT.
Float material: hollow PBT.
Mounting: horizontal on ½"BSPP female fitting (flat NBR gasket supplied).
Contact configuration: It opens when the float touch the stem. Two positions are possible:
- The float is on the top of the stem: contact is normally open (the float touch the stem when there is no liquid), and will close when the level rises and the float goes up.
- The float is pending downside under the stem: contact is normally closed (the float does not touch the stem) and will open when the level rises and the float goes up and touch the stem.
Electrical rating:
Low voltage type: maximum power 10 W (VA), max 0.5Amp, max voltage 110VAC.
230VAC type: max power 40 W (VA), max 1Amp Values for resistive circuit. For inductive or capacitive loads, a contact protection circuit must be used.
Contact resistance: 150mOhms maxi
Wires: two 6.35 × 0.8 mm quick connect terminals (to be incorporated inside appropriate ingress protected equipment)
Liquid limits: to be used with liquids chemically compatible with PBT, specific gravity higher than 0.9, dynamic viscosity higher than 0.5 × 10-4 Pa.s and lower than 10-2 Pa.s, without magnetic particles.
Ambient temperature: -20+80°C.
Maximum pressure: 1 bar (15 PSI).
Option: electrical rating 70W, 1A, 250V.